1) Fits most TV Screen: 14"~23", and some up to 25" TV
2) Tilt:15 degree forward, 15 degree backward
3) Swivel: 180 degree horizontal rotation
4) Load Capacity: 33lbs / 15kg
5) Fits VESA mounting hole patterns Max to: 100 x 100 mm (4"x4"),75 x 75 mm 6) Distance from the TV to the wall: Max 15 inch(380mm), Min 2 inch(50mm)
1) Multi-directional adjustment tilt, swivel and extend for perfect viewing angle
2) Swivel 180 degrees for comfortable view angle in different positions, Swivel left and right for comfortable view angle
3) Post-installation level adjustment allows the screen to perfectly level
4) This bracket is made from solid reinforced heavy-gauge cold steel, tested to ensure security, safety
5) Easy to install, Comes with full instructions and FREE FITTING HARDWARE
6) Look at the back of your TV, find the 4 mounting holes and measure width and height, if the width is within 15" and height is within 2"(Max VESA 100mmx100mm), then the TV Mount will work perfect for you.
1.The wall installed TV bracket must be firmness and tightness,such as concrete wall,solid brick wall and solid wood wall.Do not install on hollow and floppy walls.
2.Tighten screw so that wall plate is firmly attached,but do not over-tighten. Over-tightening can damage the screws,greatly reducing their holding power.
3.Do not remove screw or loosen screw until it is no longer engaged with the mount.Doing so may cause the screen to fall.
4.For security option,tighten all the screws with security allen wrench and please be make sure using the expansion bolt when you install the tv bracket to the wall
1x TV Wall Mount
1x Standard Hardware Kit
1x User Manual